More advice on water filtration: Berkey vs. Doulton, material for water storage

Hi Chen Ko

Thank you so very much! Your reply made my day. ☺ I truly appreciate you taking the time to advise ( and I can see you are a truly a teacher at heart, sense of humour included!). Know this has been a very busy period for most, myself as well.

I hope you will be able to clarify on two parts relating to Qns 4 & 5:


Qn 4: "Therefore, if you are getting a Berkey filter, do check whether they are using the new filter elements or the original Doulton/BB filter elements."

 

Meaning to say, between the original Doulton/BB (British Berkefeld) filter elements and the new Berkey (Black Berkey) elements, which is superior in terms of filtration? I note the inverted commas you used when you talked about NMC "improving" the original filters... 😉 so I want to know if the Black Berkey might really be a level up!

Qn 5:

The Pure Effects website pointed out that for gravity-fed filters, a main disadvantage is that " the water sits in contact with the holding chamber (plastic or metal) and has ample opportunity to absorb metal/plastic ions before going into your cup. Bacteria & fouling are also a concern with standing water in such systems (especially in warmer weather), as well as constant exposure to air/touch."

What are your views on these points raised? The potential bacterial growth does sound like something to be concerned about, and I am not sure what can be done to combat it properly and sufficiently.

I would be most grateful if you could help clarify further on these. Thank you very much and I hope you have a wonderful weekend too.

Warmly

Paloma 

Hi Paloma,

Thank you for your kind words. Here are my thoughts to your queries.


Q4: Doulton/BB vs. Berkey

Very observant of you to notice the "" in the word "improving" :-)

I am assuming that you really do need (or want) a water filter and whatever capabilities they have to offer. Let's further narrow down to only 2 choices - Doulton vs. Berkey filter elements in a gravity fed setup.

Here is an interesting read on Berkey's website comparing the 2 filter elements. Naturally, it concluded that Berkey is superior to Doulton.

Cost
I will leave cost out of the picture because the prices of the 2 seem close and depending on who you purchase from and what promotions they are offering at the time, 1 or the other can come out cheaper.

Microbes
"While the Doulton is capable of removing 99.99% bacteria and cysts, it is not capable of removing viruses to the required 99.9999% that qualifies the Berkey as a water purifier. The Big Berkey is capable of 99.9999% removal of bacteria, 99.9999% removal of cysts, and 99.9999% removal of viruses"

The same capabilities of Doulton were given in Arkwater's webpage. However, on the Water for Life webpage, it mentions 99.9999% (i.e. 6 log reduction) removal of bacteria but only 99.99% (i.e. 4 log reduction) removal of viruses. No mention was made of removing cysts.

Heavy Metals
Berkey's webpage claims that their standard filter elements can remove heavy metals and Doulton ones will need a post filter. However, if you get a Doulton ATC SuperSterasyl, you can too remove heavy metals without a post filter.

Output
"The Big Berkey produces a maximum of 84 gallons per day with the standard 2 element system compared to a maximum of 12-15 gallons a day produced by the standard Doulton system."

My biggest issue lies with this claim. Basically, they are saying that the Berkey can filter 5-6 times faster than a Doulton. Both filter elements are about the same size and made up of various media compacted into a very tight matrix with tiny pores allowing water to pass through. If you want to remove more contaminants e.g. microbes, you need the pores to be smaller and/or more surface area for the water to pass through. This translates to a longer travelling time for your water within the filter element. Yet, for some reason (perhaps some undisclosed scientific innovation/ breakthrough), you can still get an output of 5-6 times over a similar competitor. But I assume such a scientific innovation/ breakthrough (if indeed it is one) will not be cheap.

Without sounding cliche, remember a customer always wants a product/service to be cheap, good and fast. He can only get good and fast but not cheap or any other combination of 2 desirables but never all 3.

Verdict?
IF you are concerned about viruses in your water, yes, do get the Berkey, though I imagine the Doulton should be able to remove viruses to a certain extent.

Otherwise, I believe it ultimately comes down to cost. Although the Berkey webpage lists several advantages in terms of warranty, I am not sure whether they apply to international customers. Good luck choosing!


Q5: Leaching of chemicals and fouling

Seriously, short of processing your water through force fields without contacting any material, all filters/purifiers have issues of potential chemical leaching and fouling. In a gravity filter, it is more obvious because the filtered water is stored in a container, waiting to be used.

In the case of Pure Effect Filters (countertop, under-counter or whatever), does the water not have to pass through filter housings (usually plastic but can be stainless steel in other brands/models) holding the filter elements? When you close the faucet, whatever water remaining in the setup will still have to sit inside these housings. Depending on the materials of construction and the environment, these housings too have the potential to leach chemicals into your water or become covered by a slime layer of bacteria/algae on the inside over time.


Figure: I count 3 housings in this countertop filter from Pure Effect Filters and they are apparently made of plastic.

The trick is to have a knowledge of how safe various materials are. Plastics have been having a bad reputation the past years because of the high profile and nasty chemical, BPA found in certain plastics. BPA basically helps to hardens a plastic but evidently, it can leach into water it comes into contact with, especially at elevated temperatures. It has been linked to a range of human health problems, including a higher risk of certain cancers, reduced fertility, birth defects and diabetes. To make matters worse, the so called BPA-free plastics are not guilt free either. Studies have shown that the BPA substitute, BPS can display similar or worse effects compared to BPA.

As underlined earlier, not all plastics are created equal. Some are clearly more hazardous than others. HDPE, LDPE and PP have been cited to be the safest plastics. Not sure which plastic is which? Check out the recycling codes (a number within a triangle) usually on the underside of a container. Codes 2, 4 and 5 indicate HDPE, LDPE and PP, respectively.

But my personal favourite material for water storage is STAINLESS STEEL (SS). Strong and durable, the container itself can even be used to boil the water inside. It also is less conducive to bacterial growth compared to plastics. Plastics can be easily scratched and these minute depressions are ideal for microbes to stick on, unlike a smooth surface on SS. This also happens to be the material that most Berkey and Doulton filters use for their containers. (Some Berkey and Doulton filters do come in  plastic containers. I personally prefer the SS version of course.)

No doubt, glass and ceramic are generally very safe but due to their breakability, they are not my favourites.

A few final points
Whatever material you use, maintenance is still needed. You can't be lazy and leave the container as it is. Open it up to check. If you find deposits and slime growing, for goodness sake, please clean it with soap and water at least. SS is clearly superior as it has less chance of getting scratched and small pieces dislodged during cleaning. And it is resistant to most cleaning chemicals (NOT bleach though).

However, SS can be corroded in a salty environment. Drinkers of salty soup and sauces beware... and not just from the sodium you are ingesting. You may be ingesting chromium and other elements which are part of SS.

Advice on water filtration in Singapore: alumina, boiling, gravity fed vs. counter-top

Hi Chen Ko

Firstly, thanks so much for your informative blog. I am on the market for a new drinking water filter system to replace my Hyflux Gurgle, and have been trying to do my homework before buying anything. 

So far, the Berkey system seems to be a frontrunner since it is available in Singapore, and seems to do the job well (btw, one of my main requirements is fluoride removal. I agree with you about alkaline water and I am not keen on that). 

However, being a layperson, it can be hard to separate the wheat from the chaff. Hence, I am writing in hoping you may be able to spare some time to shed more light on the following areas:

1. I note from your blog that you did feel that Singapore water does not need to be filtered. I saw Singapore's Drinking Water Quality report and while I believe by international standards it is indeed excellent, as a layperson I was surprised by all that is in it! What might you say would be the top 3 or 5 substances in Singapore that consumers should try to filter out, if possible? Filters out there claim to filter out radiation, pharmaceuticals, etc, but I am not sure what might be the biggest contaminants here be. "Relevant" and appropriate filtering is a concern to me as I enjoy drinking a lot of water daily.
2. I read that activated alumina (which I believe Berkey uses) is not aluminium, and is therefore safe. Is this really the case though? Some filters use calcium-based carbon (bone char) instead. Are alumina-free filters such as that to be preferred, then, for the sake of health and safety?
3. I read too that while boiling water kills microorganisms, it actually concentrates contaminants as well! Does that mean it is a bad idea to boil water (either filtered or unfiltered) before drinking? (Well, too bad though for coffee/tea. ;-) )
4. If I remember correctly, you use British Berkefeld aka Doulton? I read that you said these are the same as Berkey. Could you pls enlighten me if their efficacy is the same? I went to the Arkwater website but their products and terminology are not exactly the same as the Berkey, so I had difficulty assessing which is better.
5. The website of the Pure Effects water filter system pointed out some convincing disadvantages of gravity-fed filters like the Berkey, and I find it hard to assess if these are deal-breakers e.g. chloramine removal, bacterial growth - could you pls advise? (Pls refer to the comparisons made in this chart and this table.) Personally, I find the Pure Effects filter a bit more complicated, but am willing to consider it if it is better than Berkey.

Thank you so much for reading my e-mail and I do apologise for e-mailing you directly. I would be most grateful if you are able to share your thoughts with me as well as your blog readers. 

Wishing you a good week ahead! 

Warmly 

Paloma

Dear Paloma,

Sorry for the late reply as I was occupied with end-of-semester issues and the recent Chinese New Year.

In reply to your queries:

1. As you have already mentioned, the tap water quality in Singapore is already excellent by WHO standards (see PUB's drinking water quality report). Frankly, I don't see how the top 3-5 contaminants to be filtered out can be chosen in a rational manner. Unless you expect something else has entered your water in between the water treatment plant and your tap. See previous post for more about this scenario.
   We are now treading into the territory of long term (decades perhaps) health effects and controversial research findings. You can also add in the popularity of certain contaminants for research and media reporting and viola, the weightage of any particular contaminant of concern can be skewed in either direction.
   
   Furthermore, potential filter/purifier owners please note... As mentioned several times before in my posts, the already low concentrations of contaminants in our tap water make them rather difficult to remove any further. Removal may only be marginal or worse, a poorly maintained water filter can actually add contaminants (e.g. bacteria) into your drinking water.
   
   My only concern for our tap water:
   
   Fluoridation. I am not sure why we are still doing it here. Our tap water is intentionally fluoridated (addition of fluoride) to fight against tooth decay. However, studies have shown that fluoride can be bad for health (arthritis, mutagenicity etc.) and unlike decades ago, we are already getting enough fluoride from our food and toothpaste. Of course, its level in our tap water is very low and certainly within WHO standards. I just don't see the logic of adding it in the first place.
2. Activated alumina is basically aluminium oxide made very porous. This allows an incredibly large surface area to remove fluoride, arsenic, selenium as water passes through the pores.
   
   Compared to the element, aluminium, alumina is much more stable chemically so aluminium is not likely to come out of alumina. Yup, that is the wonder of chemistry - an addition (sometimes in very small amounts) of something else can change the original material radically and make it more practical. A common example is iron and steel. Iron by itself is weak and impractical but add in some carbon and now you have steel which is ubiquitous in our daily lives.
   Figure: Activated alumina (https://en.wikipedia.org/wiki/Activated_alumina)
   In answer to your question, alumina is pretty safe to use. Generally... UNLESS you pour acid on to it. Then alumina does break down and goes into your water. You don't happen to run acid through your water filters, do you? Before you run out to check the pH of your tap water, relax... it is slightly alkaline.
3. Boiling does reduce the volume of your water somewhat but most automatic kettles will switch off quite fast once boiling is reached so the reduction is small, say 5% or less. Don't forget, your contaminant in tap water is already at a very low level. Assuming it does not boil off as well, its concentration will simply increase by about 5%. No such a big deal and no way it is going to break any limits in the drinking water standards.
4. I dug a bit more into the Doulton/British Berkefeld (BB)/Berkey story. Apparently, a guy called Doulton started producing ceramic filters in England in early 1800s. These filters came to be known as Doulton filters. These were subsequently modified to incorporate silver particles (for their anti-microbial properties) and registered under the trade name of "British Berkefeld". In 1998, a company called New Millenium Concepts distributed the Doulton/BB line of filters in America under the name of Berkey. At that point in time, Doulton/BB and Berkey carried the same products. However, NMC started "improving" on the original filters and came up with "Black Berkey" filter elements which are claimed to filter off more contaminants and more efficiently on certain existing contaminants.
   
   Therefore, if you are getting a Berkey filter, do check whether they are using the new filter elements or the original Doulton/BB filter elements.
5. Let me reiterate I maintain my stand that water filters/purifiers are not necessary for Singapore tap water in general. The reasons why I suggested the Doulton/BB filter in my previous posts were for emergency preparedness in the Singapore scene and  residence in less developed countries e.g. community service where clean water is not a guarantee. Keeping these reasons in mind, I would expect electricity to be absent or unreliable so a gravity fed filter is a really good idea.
   
   But it seems you still want a filter for Singapore tap water. I am sure you have your reasons and I will respect your decision. Since you mentioned coffee/tea of which I am also a fan :-), you are not getting a filter to make better coffee/tea, are you? Oh, for those of you frequenting coffee joints like Starbucks, it is normal for them to run tap water through several filters before brewing their coffee. This is supposed to produce consistently better tasting coffee compared to the unfiltered brew most of us "enjoy" at home.
   
   Ok, back to our topic... for pressurised water such as from a tap, I prefer to get a countertop model like the one presented at Pure Effect (I have no wish to endorse their products so there is no link here even though it is available in Paloma's email above). Or you can go for an under-sink model if you find space on your counter very limited. (I am sure those who own the newer HDB flats in Singapore will agree.)
   
   These flow-through filter systems address the main weaknesses of a gravity fed one - you have to manually pour water into a gravity filter once you have used up the limited amount stored below the filter elements (say 18 litres depending on model you get). Since it is by gravity, the filtration is going to be slooooooooooow. In contrast, a flow-through system supplies filtered water on demand - no waiting time, no hassle of topping up the filter tank and no concern about the storage capacity of the tank.
   
   Furthermore, Certain flow-through models can use the exact same filter elements (e.g. Doulton) as the gravity fed version - same filtration effectiveness but with greater efficiency since you do not have to wait for gravity.
   Figure: Doulton countertop model utilising Doulton (of course!) filter elements inside. http://www.arkwater.com/residential.html